Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - 3.1. Engines 2F and 3F-E
      3.1.1. Technical characteristics
      3.1.2. Types of repair without dismantle of the engine
      3.1.3. Installation of the piston of the 1st cylinder in VMT
      3.1.4. Cover of a head of cylinders
      3.1.5. Side cover of the mechanism of gas distribution
      3.1.6. Yokes and bars of pushers
      3.1.7. Springs of valves, plates, oil scraper caps
      3.1.8. The soaking-up and final collectors
      3.1.9. Head of cylinders
      3.1.10. Pushers
      3.1.11. Crankshaft pulley
      3.1.12. Forward epiploon of the crankshaft
      3.1.13. Forward cover
      3.1.14. Cam-shaft and gear wheels of the drive
      3.1.15. Cam-shaft and support
      3.1.16. Replacement of bearings
      3.1.17. Oil pallet
      3.1.18. Oil pump
      3.1.19. Flywheel (drive plate of the hydrotransformer)
      3.1.20. Back epiploon of the crankshaft
      3.1.21. Details of a suspension bracket and engine
   + 3.2. Verkhneklapanny engine 1FZ-FE
   + 3.3. Dismantle and capital repairs of the engine
   + 3.4. Engine electric equipment
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



3.1.20. Back epiploon of the crankshaft

Replacement

PERFORMANCE ORDER
1. The epiploon can be removed without dismantle of the oil pallet or the crankshaft.
2. Remove the check point (transmission) (see subsection 7.1.2 or subsection 7.2.8).
3. Remove coupling.
4. Remove a flywheel (drive plate).
5. Carefully hook and get an epiploon.
6. Clear and check a condition of a surface of a pro-point under an epiploon in the block of cylinders and the crankshaft neck condensed by an epiploon. At detection of deep development replace the crankshaft.
7. Grease working edges of a new epiploon with molybdenic lubricant, grease external edges with universal jellied lubricant.
8. Carefully dress an epiploon on a neck of the crankshaft and press an epiploon a mandrel.
9. Further assembly is carried out upside-down. Establish transmission (see subsection 7.1.2 or subsection 7.2.8).