Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Cooling systems, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydraulic clutch
   4.5. Radiator and broad tank
   4.6. Oil cooler
   4.7. Cooling system pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   + 4.11. Control panel of a heater and conditioner
   4.12. Air conditioning system and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



4.6. Oil cooler

GENERAL INFORMATION

Oil cooler of the engine 3F-E

1, 4. Laying
2. Reducing valve
3. Spring
5. Cap
6, 11. Hose of cooling liquid
7. Oil cooler
8. Ring
9. Oil pressure sensor
10. Arm
12. Oil filter

Oil cooler of the engine 1FZ-FE

1. Laying
2. Forward exhaust pipe
3. Holder
4. Conducting
5. Oil pressure sensor
6. Cap
7. Spring
8. Reducing valve
9. Oil cooler
10. Air tube
11. Final collector 1
12. Measuring instrument of a stream and resonator
13. Cover of the air filter
14. Thermal guard

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Merge liquid.
3. Remove the air filter.
4. Disconnect a forward exhaust pipe from a collector.
5. Disconnect an air tube of pulse PAIR system (if it is provided).
6. On release cars after 1993 remove a final collector.
7. Turn out the oil pressure sensor.
8. Disconnect hoses.
9. Turn off bolts and remove the oil cooler.
10. Installation is carried out upside-down