Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Cooling systems, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydraulic clutch
   4.5. Radiator and broad tank
   4.6. Oil cooler
   4.7. Cooling system pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   + 4.11. Control panel of a heater and conditioner
   4.12. Air conditioning system and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries
http://cardiology-club.com : http://anaiel.com/0001/0015/0069



4.5. Radiator and broad tank

GENERAL INFORMATION

Radiator and adjacent details

1. Perepuskna hose
2, 20. Radiator hose
3. Bracket of fastening of the battery
4. Battery
5. Tray
6. Casing
7. Krylchatka and coupling
8. Forward lattice
9, 13. Arm
10. Drain crane
11. Laying
12. Radiator
14, 18. Shock-absorbing plug
15. Oil cooler hose
16, 19. Radiator rack plug
17. Radiator stopper
21. Hose of a broad tank

Removal and installation

RADIATOR

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. After full cooling of the engine merge liquid.
3. Disconnect the top and lower hoses from a radiator.
4. Disconnect a tank hose from a radiator.
5. Remove a krylchatka.
6. On the cars equipped with automatic transmission disconnect from a radiator of the union of tubes of a cooler.
7. Substitute the pallet for collecting the spilled liquid, muffle the union.
8. Turn off bolts of the central rack of a forward lattice.
9. Remove two top arms of fastening of a radiator. Turn off all bolts of fastening (are specified by shooters) a radiator.
10. Remove a radiator, having lifted it up.
11. Check existence of leaks from a radiator, mechanical damages, purity of internal channels.
12. In need of repair of a radiator address in car service as use of the special equipment and technologies will be necessary.
13. Carefully clear intercostal spaces of a radiator, having blown it compressed air and having cleared a soft brush.
14. The radiator is established a radiator upside-down.
15. After installation of a radiator fill in liquid.
16. Start the engine and be convinced of lack of a leak.
17. Warm up the engine and again check the level of cooling liquid, if necessary restore.
18. On cars with automatic transmission check the level of transmission liquid, if necessary restore.

BROAD TANK

PERFORMANCE ORDER
1. On the majority of cars the tank simply gets from the arm close to the battery. Take aside a tee from a tank (it is specified by an arrow) and remove a tank from an arm (the right arrow).
2. Merge in a vessel liquid from a tank, examine a tank.
3. At detection of signs of damages replace a tank.
4. The tank is established upside-down.