Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Cooling systems, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydraulic clutch
   4.5. Radiator and broad tank
   4.6. Oil cooler
   4.7. Cooling system pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   - 4.11. Control panel of a heater and conditioner
      4.11.1. Adjustment of cables of management
      4.11.2. Check of governing bodies of the heater / conditioner
   4.12. Air conditioning system and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



4.11. Control panel of a heater and conditioner

GENERAL INFORMATION

Prevention

Cars of early releases are equipped with the hummock drive of heating / conditioning of salon. On cars of late releases the electric drive is installed by airinflow gates.


Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove decorative overlays of the average panel.
3. Get heads of regulators.
4. Unscrew fastening screws from the control panel face.
5. Give the panel on yourself a little.
6. On cars with a hummock wire of gates turn tags and remove cables of management.
7. On cars with the electric drive of gates of airinflow disconnect sockets.
8. Installation is carried out upside-down.
9. Check work of system of heating (and conditioning if is available).