Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Cooling systems, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydraulic clutch
   4.5. Radiator and broad tank
   4.6. Oil cooler
   4.7. Cooling system pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   + 4.11. Control panel of a heater and conditioner
   4.12. Air conditioning system and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries
ulada



4.14. Conditioner compressor

GENERAL INFORMATION

Details of fastening of the compressor

1. Arm
 

Removal and installation

PERFORMANCE ORDER
1. Depressurize the conditioner and remove coolant in car service.
2. Disconnect the battery from weight.
3. Take off a belt from the compressor.
4. Disconnect the socket, disconnect coolant tubes.
5. Turn off bolts of fastening and remove the compressor.
6. If the new compressor is installed, then perform all procedures specified in the enclosed instruction.
7. Installation is carried out upside-down.
8. Replace all sealing rings, having picked up them as the compressor and having greased with special lubricant (depends on type of the applied coolant).
9. Fill system in car service.