Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Cooling systems, heating
   4.1. Technical characteristics
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydraulic clutch
   4.5. Radiator and broad tank
   4.6. Oil cooler
   4.7. Cooling system pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   + 4.11. Control panel of a heater and conditioner
   4.12. Air conditioning system and heating
   4.13. Conditioner moisture separator
   4.14. Conditioner compressor
   4.15. Condenser
   4.16. Evaporator and broad valve
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


4.13. Conditioner moisture separator

GENERAL INFORMATION

Tubes of the highway of coolant on a moisture separator on cars of series 60, 62 and 80

1, 3. A hose with liquid coolant
2. Moisture separator

Removal and installation

PERFORMANCE ORDER

Prevention

Depressurization of the highway of the conditioner and filling with coolant is carried out in car service.


1. Depressurize the conditioner and remove coolant in car service.
2. Remove a forward lattice.
3. Disconnect from a coolant tube moisture separator.
4. Turn off a coupling bolt (or bolts of arms) and remove a moisture separator.
5. Installation is carried out upside-down.
6. Fill the conditioner in car service.