| 1. Transfer the ignition key to position of ON. |
| 2. If shooters of indexes do not move to the necessary area of a scale of the index (an empty tank, low pressure, the cold engine), then check a safety lock. If the safety lock is serviceable, then find the sensor of the corresponding index and connect a wire on the sensor to weight. If the arrow moves to the necessary area of a scale of the index, then replace the sensor. Otherwise connect to weight (according to the scheme) a conclusion on a reverse side of the index directly (crossing point). If the arrow moved, then conducting from the index on the sensor is faulty. Otherwise check tension on the second conclusion of the index. If tension is present, then replace the index. |
|
