Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and drum of the lock
   11.9. Indexes of level of fuel, pressure and temperature of oil
   11:10. Guard of devices
   11:11. Screen wiper electric motor
   11:12. Receiver and loudspeakers
   11:13. Antenna
   11:14. Heater of back glass
   11:15. Headlights
   11:16. Case of a halogen headlight
   11:17. Sound signal
   11:18. Replacement of lamps
   11:19. Side mirrors with the electric drive
   11:20. System cruise control
   11:21. Window regulator electric drive
   11:22. Electric drive of door locks
   11:23. Safety cushions
+ 12. Electrical circuitries




eeac64fe


11:18. Replacement of lamps

LAMPS OF SIDE INDEXES OF TURN

PERFORMANCE ORDER
1. On cars of early releases (FJ60, 62) unscrew screws of a plafond of the index of turn and remove a plafond.
2. On cars of late releases (FJ80) unscrew the top screw of fastening of the index.
3. Get the case of the index of turn and disconnect the socket. Turn the holder of a lamp counterclockwise and get from the case.
4. The lamp is established upside-down.

LAMPS OF FRONTAL INDEXES OF TURN

PERFORMANCE ORDER
1. Unscrew fastening screws (are specified by shooters) an optical element of the index.
2. Turn the holder counterclockwise and remove.
3. The lamp is established upside-down.

LAMPS OF THE SIGNAL OF BRAKING, BACK LAMPS AND BACK INDEXES OF TURN

PERFORMANCE ORDER
1. On cars of early releases (FJ60, 62) unscrew plafond screws. Get a lamp, having pressed and having turned counterclockwise.
2. On cars of late releases (FJ80) open a door of a back compartment and unscrew screws of fastening of the case of a back lamp in a doorway, then unscrew the screw of a plafond and remove a back lamp assembled.
3. Get the holder, having turned counterclockwise and having pulled, get a lamp.
4. Installation is carried out upside-down.

LAMP OF ILLUMINATION OF REGISTRATION PLATE

PERFORMANCE ORDER
1. Unscrew screws of fastening and remove a plafond, then get a lamp.
2. The lamp is established upside-down.

LAMP OF ILLUMINATION OF THE GUARD OF DEVICES

PERFORMANCE ORDER
1. Remove a guard of devices (see subsection 11.10). The lamp gets from the guard back.
2. To take turn a lamp counterclockwise.
3. Installation is carried out upside-down.