Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and drum of the lock
   11.9. Indexes of level of fuel, pressure and temperature of oil
   11:10. Guard of devices
   11:11. Screen wiper electric motor
   11:12. Receiver and loudspeakers
   11:13. Antenna
   11:14. Heater of back glass
   11:15. Headlights
   11:16. Case of a halogen headlight
   11:17. Sound signal
   11:18. Replacement of lamps
   11:19. Side mirrors with the electric drive
   11:20. System cruise control
   11:21. Window regulator electric drive
   11:22. Electric drive of door locks
   11:23. Safety cushions
+ 12. Electrical circuitries



11:17. Sound signal

GENERAL INFORMATION

Prevention

Previously check safety locks.


Check

PERFORMANCE ORDER
1. Disconnect the socket from a signal.
2. Directly connect the battery to a signal. In the absence of a sound replace a signal.
3. If the sound is, then check tension on a conclusion when pressing the signal button. In the presence of tension check connection with weight.
4. If there is no tension, then check the relay. It is necessary to consider that relays of a sound signal generally have 4 or 3 conclusions (3-output relays have connection with weight via the case).
5. If the relay is serviceable, then check tension on relay conclusions. If there is no tension, then check wires from a safety lock to the relay.
6. If on relay conclusions tension is, then press the button of a signal and check a chain of connection with weight between the relay and the button. If there is no break, then replace the signal button.
7. If via the button the chain on weight becomes isolated, then check existence in a chain from the relay for the button of break or short circuit.

Replacement

PERFORMANCE ORDER
1. Remove a forward lattice.
2. For replacement of a sound signal disconnect the socket and turn off fastening bolts (are specified by shooters) a signal arm.
3. Installation is carried out upside-down.