Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and drum of the lock
   11.9. Indexes of level of fuel, pressure and temperature of oil
   11:10. Guard of devices
   11:11. Screen wiper electric motor
   11:12. Receiver and loudspeakers
   11:13. Antenna
   11:14. Heater of back glass
   11:15. Headlights
   11:16. Case of a halogen headlight
   11:17. Sound signal
   11:18. Replacement of lamps
   11:19. Side mirrors with the electric drive
   11:20. System cruise control
   11:21. Window regulator electric drive
   11:22. Electric drive of door locks
   11:23. Safety cushions
+ 12. Electrical circuitries


11:19. Side mirrors with the electric drive


The chart for check of the switch of side mirrors on the FJ80 cars and designation of contacts of the socket

The mirror drive in the majority of models is carried out from 2 electric motors of vertical and horizontal shift.


1. Include ignition (not to start the engine) and lower side glasses. The selector which is built in in the switch include the necessary mirror and check operation of the drive of the right and left mirrors, displacing them to the right and to the left, up and down.
2. Listen to operation of electric motors.
3. If operation of electric motors is listened, and the mirror does not move, then the drive mechanism in a mirror is faulty. Remove a mirror and sort.
4. If operation of electric motors is not listened and mirrors do not move, then check a safety lock.
5. If the safety lock is serviceable, then get the switch, without disconnecting wires. Include ignition and check tension on the switch. If there is no tension, then check wires from a safety lock to the switch. Otherwise check the switch for what execute the following.
6. Disconnect the socket and check a switch chain according to the enclosed chart. If contacts do not become isolated in a specified way, then replace the switch.
7. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crossing point this wire on weight. If the mirror works normally with a crossing point, then repair "regular" connection with weight.
8. If the mirror does not work, then sort a mirror and check presence of tension on wires. Include ignition and transfer the switch to all provisions, checking tension. On one of wires from the switch tension has to be in each its family way (except for situation Off).
9. If tension is absent, then check a chain from a mirror to the switch.
10. If tension is, then remove a mirror and check its work, having executed connection through crossing points. If the mirror does not work, then replace it.