Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and drum of the lock
   11.9. Indexes of level of fuel, pressure and temperature of oil
   11:10. Guard of devices
   11:11. Screen wiper electric motor
   11:12. Receiver and loudspeakers
   11:13. Antenna
   11:14. Heater of back glass
   11:15. Headlights
   11:16. Case of a halogen headlight
   11:17. Sound signal
   11:18. Replacement of lamps
   11:19. Side mirrors with the electric drive
   11:20. System cruise control
   11:21. Window regulator electric drive
   11:22. Electric drive of door locks
   11:23. Safety cushions
+ 12. Electrical circuitries




eeac64fe


11.6. Breaker of indexes of turn / alarm system

GENERAL INFORMATION

The breaker is mounted in the block of the relay and safety locks in salon (see rice. The block of safety locks on the FJ80 cars).

Check and replacement

PERFORMANCE ORDER
1. Normal operation of the breaker is followed by clicks. If one of indexes of turn does not work, and clicks are not listened, then it is necessary to check lamps.
2. If both indexes do not work, then burn-out of a safety lock (is in the block of safety locks of salon), malfunction of the breaker, switch or weakening of contacts is the reason. If the safety lock fused, then check existence of short circuit of conducting, and only after this check establish a new safety lock.
3. For replacement of the breaker get it from a nest in the block of safety locks.
4. Track that the new breaker in accuracy corresponded to replaced.
5. Installation is carried out upside-down.