Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
- 11. Electric equipment
   11.1. Search of malfunctions
   11.2. Safety locks
   11.3. Fusible crossing points
   11.4. Breakers
   11.5. Relay
   11.6. Breaker of indexes of turn / alarm system
   11.7. A combination of switches on a steering column
   11.8. Lock of ignition and drum of the lock
   11.9. Indexes of level of fuel, pressure and temperature of oil
   11:10. Guard of devices
   11:11. Screen wiper electric motor
   11:12. Receiver and loudspeakers
   11:13. Antenna
   11:14. Heater of back glass
   11:15. Headlights
   11:16. Case of a halogen headlight
   11:17. Sound signal
   11:18. Replacement of lamps
   11:19. Side mirrors with the electric drive
   11:20. System cruise control
   11:21. Window regulator electric drive
   11:22. Electric drive of door locks
   11:23. Safety cushions
+ 12. Electrical circuitries




eeac64fe


11:12. Receiver and loudspeakers

GENERAL INFORMATION

Fastening of the receiver on cars of early releases

Fastening of the receiver on cars of late releases

Screws of fastening are specified by shooters.

The plug of the antenna and the socket of the receiver (on all cars)

A. Shtekker of the antenna

B. Receiver socket

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
Receiver
2. On cars of early releases remove handles of control of the receiver. Then a long face key turn off nuts of rollers of resistors and remove washers. Remove facing of the receiver.
3. On cars of late releases remove facing of a guard of devices.
4. Unscrew screws and give the receiver on yourself, disconnect the plug of the antenna and a wire. Remove the receiver.
5. Install the receiver upside-down.
The loudspeaker which is built in in the forward panel of salon (cars of early releases)
6. Remove the receiver.
7. Remove a box for trifles.
8. Through the formed apertures unscrew fastening screws, disconnect the socket and remove the loudspeaker.
The loudspeaker which is built in at a door (on cars of late releases)
9. Remove the facing panel of a door.
10. Unscrew fastening screws (are specified by shooters), disconnect the socket and remove the loudspeaker.
11. Installation is carried out upside-down.