Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
9.1. Technical characteristics
9.2. Stabilizer of a forward suspension bracket and plugs
9.3. Forward and back shock-absorbers
9.4. Springs and plugs
9.5. Springs of suspension brackets (FJ80 car)
9.6. Cross bar (FJ80 car)
9.7. Levers of a suspension bracket (FJ80 car)
9.8. Rotary fist
9.9. Steering wheel
9.10. Steering drafts
9.11. Reducer
9.12. Pump of the hydraulic booster
9.13. Removal of air from the power steering
9.14. Wheels and tires
9.15. Angles of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries
|
The power steering on engines 2F and 3F-E
1. Pump
2. Hose
3. Bolt
4. Arm |
5. Belt
6. Nut
7. Pulley
8. Tube |
Removal
| PERFORMANCE ORDER |
| 1. Take off a drive belt (see subsection 2.31). |
|
|
2. Remove as much as possible liquid from a tank, disconnect and muffle a hose and a tube of high pressure. |
|
|
3. On cars with engines 2F and 3F-E turn off forward bolts of fastening of the pump. On cars with the engine 1FZ-FE turn off bolts of fastening of the pump to the block of cylinders. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is carried out upside-down. |
|
|
2. Tighten bolts and nuts with the set moment. On cars with the engine 1FZ-FE replace a sealing ring of the pump. |
| 3. Remove air from a hydraulic actuator (see subsection 9.13). |
|
|
|
