Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   - 7.3. Transfer case
      7.3.1. Technical characteristics
      7.3.2. Epiploons of forward and back flanges
      7.3.3. Pneumowire diaphragm (early models)
      7.3.4. Electric motor of the drive of the transfer case (late models)
      7.3.5. Removal and installation of the transfer case
   + 7.4. Coupling, driveshafts, half shafts and leading bridges
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


7.3.5. Removal and installation of the transfer case


FJ60 and 62 CARS

Removal of the transfer case on these cars is accompanied by full dismantling of the transfer case and is quite difficult procedure which should be carried out in car service.


1. Remove transmission assembled with the transfer case (see subsection 7.1.2 and subsection 7.2.8).
2. Clear transmission, remove all hinged arms and dustproof a casing. Turn on the mechanism of the central blocking of differential (if it is provided).
3. Put transmission vertically, the transfer case up. Turn off bolts of fastening of a box.
4. Carefully, not to damage a back epiploon, raise a box and remove.
5. Before installation examine an epiploon and if necessary replace.
6. At assembly turn a shaft of the transfer case so that its vents coincided with transmission shaft vents.
7. Further assembly is carried out upside-down.