Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   - 7.3. Transfer case
      7.3.1. Technical characteristics
      7.3.2. Epiploons of forward and back flanges
      7.3.3. Pneumowire diaphragm (early models)
      7.3.4. Electric motor of the drive of the transfer case (late models)
      7.3.5. Removal and installation of the transfer case
   + 7.4. Coupling, driveshafts, half shafts and leading bridges
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


7.3.2. Epiploons of forward and back flanges


Epiploon of the transfer case and adjacent details

1, 6. Nut
2, 5. Flange of the leading shaft of the transfer case
3, 4. Epiploon


1. Lift the car, remove a guard of a box and merge oil.
2. Designate the provision of a flange of the driveshaft concerning a flange of the transfer case and disconnect a shaft.
3. Turn off a flange nut, holding a flange mount for the screwed bolts.
4. Remove a flange by means of a stripper.
5. Accurately hook and get an epiploon.
6. Oil edges of a new epiploon gearbox and press an epiploon a mandrel or blows through wooden whetstone.
7. Establish a flange and tighten a nut with the set moment.
8. Further assembly is carried out upside-down. Combine the tags on flanges put when dismantling.