Toyota Land Cruiser + 1. Maintenance instruction + 2. Maintenance + 3. Engines + 4. Cooling systems, heating + 5. Fuel and exhaust systems + 6. System of decrease in toxicity - 7. Transmission + 7.1. Mechanical transmission + 7.2. Automatic transmission + 7.3. Transfer case - 7.4. Coupling, driveshafts, half shafts and leading bridges 7.4.1. Technical characteristics + 7.4.2. Coupling + 7.4.3. Cardan shaft, reducer and axes 7.4.4. Forward half shaft and epiploon + 7.4.5. Back (forward) bridge + 8. Brake system + 9. Suspension brackets and steering + 10. Body + 11. Electric equipment + 12. Electrical circuitries
|
Coupling |
Hydraulic actuator liquid |
DOT3
|
Beating of a frictional disk |
no more than 0,8 mm
|
Limit distance from a surface of a frictional slip to heads of rivets of a disk |
0,3 mm
|
Deviation of a diaphragm spring from the plane |
no more than 0,5 mm
|
Flywheel beating |
no more than 0,1 mm
|
Back driveshaft |
Beating |
no more than 0,8 mm
|
Reducer |
Preliminary tightness of bearings of a shaft of the main transfer (within gearing with gear wheels) |
0,78 – 1,13 N. of m.
|
Back nave (axis of completely unloaded type) |
Preliminary tightness of bearings |
0,57 – 1,28 N. of m.
|
Inhaling moments (N. of m)
Bolts of fastening of coupling to a flywheel |
17
|
Bolts of fastening of coupling of a tank of a hydraulic actuator of coupling |
22
|
Bolts of fastening of the main cylinder |
10,8
|
Bolts of fastening of the working cylinder |
10,8
|
Driveshaft flange bolts: |
– on the transfer case |
66
|
– on a reducer |
66
|
Fastening of the case of the blocked nave to a half shaft flange |
28
|
Fastening of a cover of a nave with manual blocking to the nave case |
8,4
|
Bolts of fastening of a pin |
42
|
Fastening of a back half shaft to the nave case |
31
|
Reducer case bolts |
10,8
|
Nut of the leading gear wheel of the main transfer |
216 – 389
|
|
|