Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
- 10. Body
   10.1. Maintenance and repair
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   10.4. Repair of insignificant damages
   10.5. Repair of considerable damages
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of a cowl and cable of the drive
   10:10. Forward lattice
   10:11. Forward wing
   10:12. Internal panel of a door
   10:13. Door lock, switch of the lock and handle
   10:14. Door glass
   10:15. Window regulator
   10:16. Side mirrors
   10:17. Door
   10:18. Door of a back compartment
   10:19. Back cover (top door of a back compartment)
   10:20. Casing of a steering column
   10:21. Panels of forward facing of salon
   10:22. Average floor section
   10:23. Forward facing panel of salon
   10:24. Seats
   10:25. Bumpers
+ 11. Electric equipment
+ 12. Electrical circuitries

10:25. Bumpers

Removal and installation

PERFORMANCE ORDER

1. Disconnect all wires which can interfere with removal of a bumper.
2. Establish under a prop bumper, or ask the assistant to hold it.
	3. From a reverse side of a bumper turn off fastening bolts (are specified by shooters) a front bumper to a frame.
	4. Turn off fastening bolts (are specified by shooters) a rear bumper to a frame and remove a bumper.
5. For replacement of decorative overlays of a bumper on the FJ80 cars turn off nuts of fastening of slips.
6. Installation is carried out upside-down.