Repair and operation of the FJ60, FJ62 and FJ80 Toyota Land Cruiser 1980 - 1997 cars - 7.4.2.6. Coupling hydraulic actuator//Toyota

Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. Transfer case
   - 7.4. Coupling, driveshafts, half shafts and leading bridges
      7.4.1. Technical characteristics
      - 7.4.2. Coupling
         7.4.2.1. Coupling details
         7.4.2.2. Release bearing
         7.4.2.3. The directing bearing
         7.4.2.4. Main cylinder of coupling
         7.4.2.5. Working cylinder of coupling
         7.4.2.6. Coupling hydraulic actuator
         7.4.2.7. Coupling pedal
      + 7.4.3. Cardan shaft, reducer and axes
      7.4.4. Forward half shaft and epiploon
      + 7.4.5. Back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries
eeac64fe



7.4.2.6. Coupling hydraulic actuator

GENERAL INFORMATION

Pumping of system will be required every time after carrying out dismantling and assembly of the highway of a hydraulic actuator of coupling.

Removal of air

PERFORMANCE ORDER
1. Fill a tank with fresh brake fluid (use of the fulfilled liquid is forbidden).
2. Lift the car.
3. Remove a cap, dress a hose on the cylinder union.
4. Lower other end a hose in the capacity filled with brake fluid of 5 cm.
5. Ask the assistant to press a coupling pedal to the full and unscrew the pumping union.
6. When liquid ceases to follow wrap the union.
7. Ask the assistant to release a pedal slowly.
8. Repeat the procedure until the hose with liquid does not cease to leave vials of air. Constantly you watch level, – the tank has to be filled with liquid.
9. Tighten the union, dress a cap and lower the car.
10. Restore liquid level in a tank and check coupling work.