Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. Transfer case
   - 7.4. Coupling, driveshafts, half shafts and leading bridges
      7.4.1. Technical characteristics
      - 7.4.2. Coupling
         7.4.2.1. Coupling details
         7.4.2.2. Release bearing
         7.4.2.3. The directing bearing
         7.4.2.4. Main cylinder of coupling
         7.4.2.5. Working cylinder of coupling
         7.4.2.6. Coupling hydraulic actuator
         7.4.2.7. Coupling pedal
      + 7.4.3. Cardan shaft, reducer and axes
      7.4.4. Forward half shaft and epiploon
      + 7.4.5. Back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



7.4.2.5. Working cylinder of coupling

GENERAL INFORMATION

Details of the working cylinder of coupling

1. Cylinder
2. The union for removal of air
3. Cover
4. Pusher
5. Piston
6. Spring

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift a car front.
3. Disconnect the highway of a hydraulic actuator from the cylinder, merge liquid and muffle tubes.
4. Turn off two bolts.
5. Remove the cylinder.

Dismantling

PERFORMANCE ORDER
1. Remove a cover and a spring ring.
2. Beat out the piston and get a spring.
3. Check a condition of an internal surface of the cylinder наощупь.
4. At detection of a roughness replace the cylinder.
5. Collect the cylinder, having tracked correctness of installation of new sealants.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. Enter a pusher into dredging on a clutch release fork lever.
3. Fix the cylinder, attach a hose and remove air from a hydraulic actuator.