Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
- 5. Fuel and exhaust systems
   - 5.1. Carburetor engines
      5.1.1. Fuel pump and pressure of fuel
      5.1.2. Fuel pipe
      + 5.1.3. Fuel tank
      5.1.4. Fuel pump
      5.1.5. Fuel level sensor
      5.1.6. Air filter
      5.1.7. Cable of the drive of a butterfly valve
      - 5.1.8. Carburetor
         5.1.8.1. Check and dismantling of the carburetor
         5.1.8.2. Adjustment of the carburetor
         5.1.8.3. Removal and installation of the carburetor
      5.1.9. Service of the exhaust system
   + 5.2. Engines with fuel injection
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe

5.1.8.3. Removal and installation of the carburetor

Removal

PERFORMANCE ORDER
1. Turn off a stopper of a gasoline tank and disconnect the battery from weight.
2. Remove the case of the air filter.
3. Disconnect a cable of the drive of a butterfly valve.
4. On cars with automatic transmission disconnect a cable of switching to a low gear (kick - down - the mode).
5. Designate and disconnect all vacuum hoses and a hose of supply of fuel from the carburetor.
6. Designate and disconnect all sockets from the carburetor.
7. Turn off bolts of fastening and remove the carburetor and laying.
8. Muffle an opening in a collector.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down, with observance of the following rules.
2. Remove the laying material remains.
3. Replace laying of the carburetor.
4. Tighten fastening bolts in a cross order with m 20 N.' moment, doing 1/4 turns at one time.
5. Adjust kick cable - down - the mode.