Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
   9.1. Technical characteristics
   9.2. Stabilizer of a forward suspension bracket and plugs
   9.3. Forward and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (FJ80 car)
   9.6. Cross bar (FJ80 car)
   9.7. Levers of a suspension bracket (FJ80 car)
   9.8. Rotary fist
   9.9. Steering wheel
   9.10. Steering drafts
   9.11. Reducer
   9.12. Pump of the hydraulic booster
   9.13. Removal of air from the power steering
   9.14. Wheels and tires
   9.15. Angles of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


9.2. Stabilizer of a forward suspension bracket and plugs

Removal

PERFORMANCE ORDER
1. Lift a car front.
2. Remove drafts of the stabilizer. On the FJ60, 62 cars remember an assembly order of details of drafts of the stabilizer – plates and plugs.
3. For removal of drafts it is enough to turn out bolts from arms.
4. Turn off bolts of collars of plugs and remove the stabilizer.
5. Remove plugs of the stabilizer and check their condition of plugs. Replace the damaged plugs (cracks, rubber hardening, etc. signs). If necessary replace plugs of drafts of the stabilizer.

Installation

PERFORMANCE ORDER
1. Install new plugs.
2. Insert plugs into collars and install the stabilizer. Do not tighten bolts.
3. Establish drafts and tighten nuts with the set moment.
4. Tighten stabilizer bolts with the set moment.