Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
- 9. Suspension brackets and steering
   9.1. Technical characteristics
   9.2. Stabilizer of a forward suspension bracket and plugs
   9.3. Forward and back shock-absorbers
   9.4. Springs and plugs
   9.5. Springs of suspension brackets (FJ80 car)
   9.6. Cross bar (FJ80 car)
   9.7. Levers of a suspension bracket (FJ80 car)
   9.8. Rotary fist
   9.9. Steering wheel
   9.10. Steering drafts
   9.11. Reducer
   9.12. Pump of the hydraulic booster
   9.13. Removal of air from the power steering
   9.14. Wheels and tires
   9.15. Angles of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


9.11. Reducer




If the car is equipped with a safety cushion, then the turn of wheels after removal of a reducer is not allowed. Block a wheel for what transfer the ignition key to position of LOCK, or wind a wheel with a seat belt which fix.

1. Lift a car front.
2. Turn off and muffle the union (are specified by shooters).
3. Designate the provision of the lower fork of the cardan hinge of a steering shaft concerning a reducer shaft. Turn off a collar bolt (it is specified by an arrow).
4. Remove a bipod.
5. Turn off fastening bolts (are specified by shooters), give a reducer down and disconnect from an intermediate steering shaft. Remove a reducer.


1. Establish a reducer, having combined the tags put when dismantling.
2. Tighten fastening bolts with the set moment.
3. Establish a bipod on a reducer shaft, having combined the tags put when dismantling.
4. Tighten a collar bolt with the set moment.
5. Attach the union of the hydraulic booster and restore liquid level.
6. Establish a wheel and lower the car.