Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car


Toyota Land Cruiser
- 1. Maintenance instruction
   1.1. Introduction
   1.2. Control panel
   + 1.3. Governing bodies and instrumentations
   1.4. Identification numbers of the car
   1.5. Purchase of the old car or mysterious set of figures and letters
   1.6. The changed numbers
   1.7. Arrangement of elements
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe

1.4. Identification numbers of the car
GENERAL INFORMATION

Arrangement of number of the chassis

Arrangement of number of the engine

Arrangement of identification number of the car (VIN)

 From the middle of 1981 all models of firm Toyota which were exported to Europe and the USA had 17-unit identification number.

TOYOTA J 6 / LEND CRUISER VERSATILE PERSON

Location of VIN: on a frame, in front, on the right, behind the first axis.

Location of number of the motor: on the block of cylinders of the engine, behind, at the left.

12 H....... (= serial number of the car).

Location of the standard / factory (factory) plate: in motor office, on a body front, at the left.

Prevention

Cars proizvodennye Portugal occur among the Cruiser Lend cars. At them identification number begins on TWO.

TOYOTA J 7 / LEND CRUISER

Interpretation of identification number:

1. Number of the world producer for Toyota.

2. Body form (here: V = the car, komb, 2-dverny with a double-wing back door).

3. Blank space.

4. Motor series (R = motor 22R type, petrol; L = type of the motor 2L-T, diesel).

5. Model series (J = Lend Kruizer).

6. A model series with motor type (70 = base of the car of 2310 mm with type of the motor 22R or 2 L-T; 73 = the base of the car makes 2600 mm with type of the motor 2L-T.

7. Serial number.

Location of number of the motor: 22 R-motor: on a case, in front, at the left, in the lower part (gasoline.); 2 L-T motor: on a case, in front, at the left, over TNVD (diesel).

Location of the standard / factory (factory) plate: in motor office, on a body front, at the left.

Prevention

Perhaps also the fact that TWO can be initial letters of identification number.