Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. Transfer case
   - 7.4. Coupling, driveshafts, half shafts and leading bridges
      7.4.1. Technical characteristics
      + 7.4.2. Coupling
      - 7.4.3. Cardan shaft, reducer and axes
         7.4.3.1. Check of driveshafts and hinges
         7.4.3.2. Removal and installation of the driveshaft
         7.4.3.3. Cardan hinges
         7.4.3.4. The blocking nave
      7.4.4. Forward half shaft and epiploon
      + 7.4.5. Back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe

7.4.3.4. The blocking nave
GENERAL INFORMATION

Nave with manual blocking
1. Conic washer and nut
2. Cap of a nave and laying
 3. Lock ring
4. Case of a nave and laying

Nave coupling details with manual blocking
1, 7. Lock ring
2. Laying
3. Case
4. Nave cap flange
5. Handle and sealing ring
 6. Ball and spring
8, 9. Spring
10. Clamp ring
11. Coupling

Removal and installation

NAVE WITH MANUAL BLOCKING

PERFORMANCE ORDER
1. Rearrange a nave cap in situation Free (the nave is unblocked).
2. Turn off bolts of fastening and remove a cap nut together with the coupling.
3. Get a lock ring.
4. Turn off nave case nuts.
5. The brass hammer weaken and remove a conic washer.
6. Remove the nave case.
7. If further dismantling of the coupling of a nave is necessary for cleaning, then pay special attention much of assembly of details.
8. Clear all details on one, without breaking their order.
9. Execute assembly of the coupling as it should be the return to dismantling.
10. Assembly is carried out upside-down.
11. Replace all laying and grease vents with universal lubricant.
12. Transfer the handle to situation Free and establish a cap flange so that ears on a flange came into case grooves.

SELF-LOCKING NAVE

PERFORMANCE ORDER
1. Take off a cap.
2. Turn off bolts of fastening of a flange.
3. The brass hammer weaken and remove a conic washer.
4. Get a lock ring and remove a nave.
5. Assembly is carried out upside-down.