Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car


Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburetor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Decompression of fuel system
      + 5.2.3. Fuel pump and pressure of fuel
      5.2.4. Fuel pipes and joints
      5.2.5. Fuel pump
      5.2.6. Fuel level sensor
      5.2.7. Air filter
      5.2.8. Cable of the drive of a butterfly valve
      + 5.2.9. System of electronic injection of fuel (EFI system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe

5.2.6. Fuel level sensor

Check

PERFORMANCE ORDER
1. Before check of the fuel level sensor completely fill a tank with gasoline.
2. On cars of 1988-90 find the socket which is near a tank, on cars since 1991 of release remove a back seat and a cover of the hatch.
3. Disconnect the socket of the fuel level sensor.
4. Measure sensor resistance between conclusions.
5. At completely filled tank resistance has to be 17 Ohms (1988-90) or 3 Ohms on cars since 1991.
6. At an empty tank resistance has to be 120 Ohms (1988-90) or 110 Ohms on cars since 1991.
7. Replace the sensor if resistance differs from specified.
8. The sensor can also be checked, having removed it from a tank. Measure resistance at completely lowered float (a tank empty) and in the extreme top provision of a float (a full tank).

Replacement

PERFORMANCE ORDER
1. Remove from the fuel tank the pump assembled with the sensor.
2. Incline and carefully get the sensor.
3. Disconnect the socket, unscrew screws of fastening and remove the sensor.
4. The sensor is installed upside-down.