Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburetor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Decompression of fuel system
      + 5.2.3. Fuel pump and pressure of fuel
      5.2.4. Fuel pipes and joints
      5.2.5. Fuel pump
      5.2.6. Fuel level sensor
      5.2.7. Air filter
      5.2.8. Cable of the drive of a butterfly valve
      + 5.2.9. System of electronic injection of fuel (EFI system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


5.2.4. Fuel pipes and joints

Check

PERFORMANCE ORDER
1. When performing any works under the car always check a condition of fuel pipes, all joints and connections.
2. Check existence on hoses and tubes of cracks, breaks, deformations.
3. Be convinced of reliability of fastening of fuel pipes to the body bottom, check a condition of fixing brackets.
4. Check tightness of connections of hoses with unions of metal tubes, a condition of collars of hoses.

Replacement

PERFORMANCE ORDER
1. New details of the fuel highway have to be made of the same material, as the replaced details.
2. It is forbidden to establish hoses and tubes from materials, not corresponding recommended, or not calculated on fuel influence.
3. Before dismantling of the fuel highway, or a detachment of any detail, always mark a relative positioning of tubes and hoses, remember initial installation of collars and forelocks that at assembly in accuracy to restore an initial arrangement of these details.
4. Observe the scheme and an order of fastening of hoses (2) on unions of metal tubes (1) (3 – a collar).
5. Before dismantling of a fuel pipe execute actions for a decompression of the highway of fuel system, turn off a stopper of a jellied mouth of a tank and disconnect the battery from weight.
6. Wrap up the investigated connection by rags for absorption of the spilled gasoline.