Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
- 10. Body
   10.1. Maintenance and repair
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   10.4. Repair of insignificant damages
   10.5. Repair of considerable damages
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of a cowl and cable of the drive
   10:10. Forward lattice
   10:11. Forward wing
   10:12. Internal panel of a door
   10:13. Door lock, switch of the lock and handle
   10:14. Door glass
   10:15. Window regulator
   10:16. Side mirrors
   10:17. Door
   10:18. Door of a back compartment
   10:19. Back cover (top door of a back compartment)
   10:20. Casing of a steering column
   10:21. Panels of forward facing of salon
   10:22. Average floor section
   10:23. Forward facing panel of salon
   10:24. Seats
   10:25. Bumpers
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


10.9. Latch of a cowl and cable of the drive

Removal and installation

LATCH

PERFORMANCE ORDER
1. Outline a contour of a latch and turn off fastening bolts to a front cross-piece. Remove a latch.
2. Disconnect a cable from a latch.
3. Installation is carried out upside-down.

DRIVE CABLE

PERFORMANCE ORDER
1. Disconnect a latch drive cable.
2. Attach a piece of a strong wire to a cable and following on the route of laying of a cable, disconnect the latches fixing a cable cover to a body.
3. In salon unscrew fastening screws (are specified by shooters) cowl latch drive cable handles.
4. Get a cable, having extended it together with a sealant in salon until the wire seems. Remove an old cable and attach to a wire a new cable together with a sealant.
5. Stretch a cable in a motor compartment, having undertaken a wire.
6. Installation is carried out upside-down. Establish a through sealant, having pressed on it fingers so that it came into an opening of a partition of a motor compartment.