Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
- 8. Brake system
   8.1. Technical characteristics
   + 8.2. ABS system
   8.3. Blocks of disk brakes (forward or back)
   8.4. Brake support
   8.5. Brake disk
   8.6. Blocks of drum brakes
   8.7. Wheel cylinder of brakes
   8.8. Main cylinder of brakes
   8.9. Hoses and tubes of a hydraulic actuator
   8.10. Removal of air from a hydraulic actuator of brakes
   8.11. Vacuum amplifier of brakes
   8.12. Blocks of the emergency brake of back disk brakes
   8.13. Adjustment of the emergency brake
   8.14. Cable of the emergency brake
   8.15. Braking signal switch
   8.16. The regulator of pressure of back brakes (dosing and perepuskny the valve)
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


8.15. Braking signal switch

GENERAL INFORMATION

Switch arrangement

The switch (it is specified by an arrow) is mounted in the top part of a pedal. When pressing a pedal contacts of the switch become isolated and the braking signal lamp lights up.

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect the socket from the switch.
3. Release a lock-nut and remove the switch from a pedal arm.
4. Installation is carried out upside-down.

Adjustment

PERFORMANCE ORDER
1. Release a lock-nut and move the switch, having established a standard gap with a pedal.
2. Attach wires to the switch, connect the battery to weight.
3. Check operation of the switch.