Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
- 8. Brake system
   8.1. Technical characteristics
   + 8.2. ABS system
   8.3. Blocks of disk brakes (forward or back)
   8.4. Brake support
   8.5. Brake disk
   8.6. Blocks of drum brakes
   8.7. Wheel cylinder of brakes
   8.8. Main cylinder of brakes
   8.9. Hoses and tubes of a hydraulic actuator
   8.10. Removal of air from a hydraulic actuator of brakes
   8.11. Vacuum amplifier of brakes
   8.12. Blocks of the emergency brake of back disk brakes
   8.13. Adjustment of the emergency brake
   8.14. Cable of the emergency brake
   8.15. Braking signal switch
   8.16. The regulator of pressure of back brakes (dosing and perepuskny the valve)
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


8.14. Cable of the emergency brake

Replacement

PERFORMANCE ORDER
1. Remove the central section then access to the regulator is provided.
2. Release the lever of a brake and turn off a lock-nut and an adjusting (lower) nut.
3. Remove a cable from the lever.
4. Working under the car, extend a cable, having passed through an opening in a floor.
5. Remove cable arms from a frame.
6. Remove an axis (it is specified by an arrow) and a bracket from a crank.
7. Turn off an arm bolt (it is specified by an arrow) on the compensator and remove a cable.
8. Installation is carried out upside-down.
9. After assembly adjust the emergency brake.