Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car

Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmission
   + 7.1. Mechanical transmission
   + 7.2. Automatic transmission
   + 7.3. Transfer case
   - 7.4. Coupling, driveshafts, half shafts and leading bridges
      7.4.1. Technical characteristics
      + 7.4.2. Coupling
      - 7.4.3. Cardan shaft, reducer and axes
         7.4.3.1. Check of driveshafts and hinges
         7.4.3.2. Removal and installation of the driveshaft
         7.4.3.3. Cardan hinges
         7.4.3.4. The blocking nave
      7.4.4. Forward half shaft and epiploon
      + 7.4.5. Back (forward) bridge
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries

7.4.3.2. Removal and installation of the driveshaft

PERFORMANCE ORDER

1. Lift the car.
	2. For preservation of dynamic balancing at assembly designate the mutual provision of forks of the driveshaft and flanges of the leading gear wheel of a reducer.
	3. Also designate the mutual provision of a fork of the sliding coupling concerning a shaft.
	4. Turn off nuts of bolts of fastening of the driveshaft from the transfer case and a reducer.
5. Having disconnected the driveshaft check a condition of hinges, having shaken them in the parties and in the longitudinal direction. At detection of a side play replace hinges.
6. Installation is carried out upside-down.
7. Combine the tags put when dismantling and delay fastenings with the set moment.