Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
- 5. Fuel and exhaust systems
   + 5.1. Carburetor engines
   - 5.2. Engines with fuel injection
      5.2.1. Technical characteristics
      5.2.2. Decompression of fuel system
      + 5.2.3. Fuel pump and pressure of fuel
      5.2.4. Fuel pipes and joints
      5.2.5. Fuel pump
      5.2.6. Fuel level sensor
      5.2.7. Air filter
      5.2.8. Cable of the drive of a butterfly valve
      + 5.2.9. System of electronic injection of fuel (EFI system)
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe


5.2.8. Cable of the drive of a butterfly valve

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Release cable tip lock-nuts on the gate case.
3. Turn the lever of a butterfly valve and get a cable, having passed it through a groove in the lever.
4. Disconnect a cable from a pedal. Turn off fastening bolts (are specified by shooters) a cable cover arm to a partition of a motor compartment.
5. Extend a cable through a motor compartment.

Installation and adjustment

PERFORMANCE ORDER
1. The cable is established upside-down. Be convinced of correctness of installation of a through sealant of a cover of a cable in a partition of a motor compartment.
2. For adjustment of a cable press to the full a pedal, at the same time the butterfly valve has to be completely open. If the gate did not open completely, then release lock-nuts, press a pedal to the full and at completely open gate tighten lock-nuts.
3. Check adjustment. At a pedal otpuskaniye the gate has to be closed completely.