Toyota Land Cruiser

FJ60, FJ62 and FJ80 1980-1997 of release

Repair and operation of the car



Toyota Land Cruiser
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Engines 2F and 3F-E
   + 3.2. Verkhneklapanny engine 1FZ-FE
   - 3.3. Dismantle and capital repairs of the engine
      3.3.1. Technical characteristics
      3.3.2. Diagnostics of the engine by means of the vacuum gage
      3.3.3. Check of a compression
      3.3.4. Dismantle of the power unit
      3.3.5. Removal and installation of the engine
      3.3.6. Alternatives of capital repairs
      - 3.3.7. Order of dismantling of the engine
         3.3.7.1. Head of cylinders
         3.3.7.2. Repair of valves
         3.3.7.3. Conrod and piston group
         3.3.7.4. Crankshaft
         3.3.7.5. Cleaning and check of the block of cylinders
         3.3.7.6. Honningovaniye of cylinders
         3.3.7.7. Rods and pistons
         3.3.7.8. Radical and conrod bearings
      + 3.3.8. Engine assembly order
      3.3.9. Launch of the engine after repair and a running in
   + 3.4. Engine electric equipment
+ 4. Cooling systems, heating
+ 5. Fuel and exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmission
+ 8. Brake system
+ 9. Suspension brackets and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries




eeac64fe

3.3.7.6. Honningovaniye of cylinders

PERFORMANCE ORDER
1. For a honningovaniye it is recommended to use "brush".
2. Clamp adaptation in the electric drill.
3. Well oil the surface of the cylinder, turn on the electric drill and periodically move up and down in the cylinder.
4. At the same time on a surface of walls of the cylinder the structure of the thin lines which are crossed at an angle about 60 ° has to be formed.
5. To get the brush only after a full stop of a drill.