Determination of level of liquid in a nutritious tank of the main brake cylinder
|
Liquid level in a nutritious tank of the main brake cylinder is determined by the marks Min and Max. |
Determination of level of liquid in a coupling cylinder tank
|
Level (1) of liquid in a tank of the cylinder of coupling prosmativatsya outside. |
The main cylinder of brakes is mounted on the vacuum amplifier in a motor compartment. The main cylinder of coupling provided on cars from the manual transmission is near the main cylinder of brakes.
Liquid level in both tanks has to be 6 mm lower than the mark Max.
PERFORMANCE ORDER |
1. If liquid level in both tanks is lower normal, then remove traffic jams from tanks, previously having wiped a surface of tanks with pure rags. |
2. In tanks of the main cylinder of brakes and coupling add only the recommended liquid (see subsection 2.2). It is forbidden to add the liquid which was in an open vessel. |
3. After removal of a stopper of a tank check existence of pollution in a tank. In the presence of a deposit liquid should be merged and replaced. |
4. After restoration of level of liquid in tanks be convinced of reliability of fastening of traffic jams to avoid leak of liquid and (or) pressure drop in system. |
5. Level of brake fluid will go down in process of natural wear of brake shoes. Need of a frequent dolivka of liquid in a tank of the main cylinder of brakes is a leak sign in the brake system which reason should be found and eliminated immediately. Check all connections and a condition of tubes and hoses of a brake contour, and also wheel cylinders and the vacuum amplifier. |
6. If when checking level of liquid in a tank of the main brake cylinder absence is revealed (or almost total absence) liquids, then it is necessary to remove air from system. |
|
|