2. Remove the internal panel and disconnect all sockets of a door.
3. Disconnect racks on both parties while the assistant supports a cover.
4. Turn off fastening bolts (are specified by shooters) loops and uncover.
5. Installation is carried out upside-down.
Adjustment
PERFORMANCE ORDER
1. Adjustment of a back cover concerning a body is reached by movement at the released bolts of fastening of loops. The cover is considered adjusted if edges of a cover are parallel to a door of a back compartment and an edge of the panel of a roof.
2. Adjust gearing of a latch with a clamp, moving a clamp up-down, or back and forth.